| 1998-2007 Ford Ranger |
 |
| 4\5" Ranger Slam Kit |
| DJM's Ranger 4/5
drop is one of our most popular kits. Using the same technology as our F150
Grand Slam, this kit allows a full 4" drop in front while maintaining factory
ride and alignment. Using a lower control arm with a 2" coil achieves the 4"
front drop. An upper control arm is required to correct the alignment. These
control arms now include new upper and lower ball joints. The control arms
replace the factory arms and install using factory hardware. No modifications
to the truck are necessary. Control arm include urethane bushings, lower arms
use DJM's exclusive twin tube sleeves. New front and rear shocks are required
with this kit. |
 |
 |
| Lower
Control Arm |
Upper Control Arm |
 |
 |
| 2"
Front Springs |
5" Rear Flip Kit |
 |
| 2\3" Ranger Kit |
| DJM has revised
their '98 Ford Ranger 2/3 Kit. The original kit used a spring hanger kit, a
time consuming installation. Now a flip kit and lifting shackle is used . This
new rear kit is much easier to install and is about half the cost of hangers.
The kit part number is still the same. DJM #K3098-2\3 includes front coil
springs and rear flip kit. New front and rear shocks are required. This kit
sells for about $470 complete with shocks. |
|
 |
| 2"
Front Springs |
3" Rear Flip Kit |
 |
 |
| Shocks |
Frame Support |
|
Specialty Products camber\caster kit, 1998-2006
Ranger part #87500. Replaces factory upper control arm bolts with new
adjustable bolts and cams Changes Camber and\or Caster up to 2°. One kit
does both sides. |
|
