2004-2007 Ford F150 2wd & 4wd
DJM’s newest lowering kit for 2004 F150 is now available in 2 sizes. The front is dropped with lower control arms (2-1/2” or 3-1/2” drop). Front control arms include new ball joints and urethane bushings, and bolt on to factory locations with factory hardware. The rear drop starts with a flip kit, which drops about 6”. Next, add one of two lifting parts for the desired rear height. A 1” rear shackle can be used for a 5” drop or a 2” lifting hanger can be used for a 4” drop (both sold separately). New shocks are needed for the rear. DJM nitro gas shocks are the preferred choice. A rear lowering shackle is also available for anyone who wants to drop just the rear. DJM lowering shackle drop 1-1/2” to 2”.
This kit is designed for vehicles with one piece drive shaft. Some F150's have two piece drive shafts with a carrier bearing. Raising the carrier bearing is required or drive line vibration will occur.
3-1/2" arms may have clearance problems using the stock tires.
* 3-1/2" arms require trimming tie rod ends to adjust toe.
Click here for details
Rear kit is designed for vehicles with out factory lifting blocks. Vehicles with rear blocks will drop further and require additional parts to achieve desired height.
DJM 2-1/2"-4" Drop - Front Lower Control Arms, Rear Flip Kit and Lifting Hangers.
DJM Rear Lowering Shackles
DJM shackles will lower the rear 1-1/2" to 2". They have two holes to mount the leaf springs. Simply replace the factory shackles using factory hardware. Part # SH3204-2

Application Guide
2004-2007 F150 2 & 4wd
3-1/2" Front \ 5" Rear
1)CA3205L-3D*
1)CA3205L-3P*
1)RK3204-5**
2)2200 		Driver Side Lower Control Arms
Passenger Side Lower Control Arms
Rear Kit (Flip Kit & Lifting Shackle)
Rear Shocks
2-1/2" Front \ 4" Rear
1)CA3205L-2D*
1)CA3205L-2P*
1)RK3204-4**
2)2200		 Driver Side Lower Control Arms
Passenger Side Lower Control Arms
Rear Kit (Flip Kit & Lifting Hanger)
Rear Shocks
* 3-1/2" arms may have clearance problems using the stock tires.
* 3-1/2" arms require trimming tie rod ends to adjust toe.
Click here for details
* CA3205L-2 & CA3205L-3 will fit both 2wd and 4wd.
**Rear kit is designed for vehicles with out factory lifting blocks. Using rear flip kit on vehicles with rear blocks will drop further and require additional parts to achieve desired height.
Finished height may vary when used on Lightning or Harley Davidson.
Individual Parts
Part # Description DCode
Shocks All Part numbers (each) 55.07
CA3205L-2D 2004-2007 Driver Side Arm 2WD & 4WD 220.47
CA3205L-2P 2004-2007 Passenger Side Arm 2WD & 4WD 220.47
CA3205L-3D 2004-2007 Driver Side Arm 2WD & 4WD 220.47
CA3205L-3P 2004-2007 Passenger Side Arm 2WD & 4WD 220.47
RK3204-4 2004-2007 F150 4" Rear Kit 336.16
RK3204-5 2004-2007 F150 5" Rear Kit 225.91
FK3204-6 2004-2007 F150 Flip Kit 159.81
EH3204 2004-2007 F150 Lifting Hanger 176.34
SH3200 2004-2007 F150 Lifting Shackle 66.09
FK3204-UBK 2004-2007 F150 Ubolt Kit 55.07
BK3204L Bushing Kit for CA3204L & CA3205L 38.53
8695T Ball Joint for CA3204L & CA3205L (each) 77.12
SP86240 2004-2007 F150 Alignment Kit (2 required) 130.89
 
We install the perfect lowering kit for this Harley-Davidson F-150…


Specialty Products camber\caster kit, 04-07 F150 part #86240. Replaces factory lower control arm bolts with new bolts and cams for adjustment. Adjustable range from +\- 1° Camber and +\- 1.5° Caster.
Requires 1 kit per side.